Melting granulating method for PS recycling process
Granulation is the main method to recycle styrofoam, most EPS foam are recycled by this method. Melt granulation process for the recycling of the polystyrene material, can better maintain the material mechanical properties under the appropriate technology , according to study of Dow Chemical Company, after repeatedly used in thermal processing. The average relative molecular mass of polystyrene will reduce, local small molecular chain will rupture, after more than 5 times of recycling use, will remain 80% of the elongation at break, 90% of the impact strength.
The main process of melt granulation process for polystyrene foam recycling, included crushing, washing, drying, degassing, extrusion, granulation. The pellet recycling production can be processed for a variety of products again.

Transport of waste polystyrene
Because of the huge volume, high transportation costs, once let the plastic recycling enterprises think it difficult for EPS waste recycling. One of the largest PS recycling enterprises Shanghai Intco company independent researched and developed production series of foam GreenMax compressor and styrofoam densifier, can solve the problem that EPS foam has difficulty in transporting because of PS waste huge volume. After cold or hot pressing, the volume of PS scrap foam plastics is reduced to 1 / 40 of the original, greatly reducing the transportation and recovery process cost. The promotion and use of compression equipment greatly reduces the waste polystyrene foam material transportation costs, making a wide range of possible recovery.
Crushing, washing
After sorting, Large pieces of foam needs to be shred into small pieces about 1 cm in diameter, can be fed into the extruder. Large pieces of foam first was crushed into 1 cm pieces, and then by the fan through the conveying pipeline sent to clean the sink, sink in the rotary slide in the rotating process churning debris and push the debris to continue moving forward. The washing water tank were usually two to three series together, after a number of cleaning tank after washing, most of the residual dirt foam surface is clean. For grinding parts clean appliances packaging materials can not directly extrude after washing out.