Introduction to several types of professional EPS recycling machines
Polystyrene has a high recycling value, and the choice of professional machines is especially important.
EPS screw compactor
The EPS compactor uses a screw to directly pressurize the EPS foam into a cold press compression process without heating. GREENMAX foam compressor reduces the volume of EPS foam at a ratio of 90:1, and increases foam density, which makes storage and transportation more economical and convenient.

EPS surface meting machine
The surface melting type foam compressor is mainly used for dealing with PE foam material, and the difference between the hot-press type compactor and the cold-press type compressor is that a heater is added in the press section of the cold-press type compressor to make the material passing through the heating section It is extruded in a semi-melt state by a discharge port.

EPS hot melting machine
The EPS densifier is similar to the extrusion machine. After the material is completely melted, it is pushed out from the discharge port. The GREEMAX EPS melting machine needs to add one or more heating modules like the hot-press type foam compressor.

Hydraulic foam compactor
The hydraulic push type foam compactor adopts the screwless design, uses the hydraulic pressure to do work, and applies sufficient pressure to the objects in a certain space to make the waste foam dense, so as to achieve the purpose. Hydraulic pushing foam compactor is the more complex models of the above foam recycling machines, the highest compression output can reach more than 700kg per cubic meter.
Professional machines make your recycling more efficient and profitable, GREENMAX not only offers you professional machines, but also purchases back the foam blocks you produced, so if you have any ideas about EPS recycling, welcome to consult GREENMAX, the EPS recycling specialist.