Deprecated: Function WP_Dependencies->add_data() was called with an argument that is deprecated since version 6.9.0! IE conditional comments are ignored by all supported browsers. in /home2/a919310/greenmax-compactor.co.uk/wp-includes/functions.php on line 6260

Deprecated: Function WP_Dependencies->add_data() was called with an argument that is deprecated since version 6.9.0! IE conditional comments are ignored by all supported browsers. in /home2/a919310/greenmax-compactor.co.uk/wp-includes/functions.php on line 6260

Tips on Maintenance of GREENMAX Styrofoam Compactor

GREENMAX is a well-known brand in the field of Styrofoam recycling. Of course its price is not cheap. If the machine is properly maintained, it can run properly for a long time, and continuously create economic benefits and reduce maintenance costs later. Here are some tips on how to maintain the Styrofoam compactor on a regular basis.

(1) Wires and cables shall be protected from damage, corrosion, over bending, etc.

(2) In order to prevent it from knotting, at the end of the day, don’t get dirty in dirty places.

(3) Wires and cables shall be in good lubrication condition.

(4) Check the quality of the wires when replacing them.

(5) If one sixth of the cables are broken, they should be replaced. Figure 5 shows the convolution method.

(6) Regularly check the sealing condition of the joints and high-pressure hoses in the cylinder.

(7) No. 46 anti-wear hydraulic oil is used in the oil cylinder, and no impurities more than 0.06mm are allowed to enter. It is recommended to change the oil once a year.

(8) Clean the filter screen of oil tank regularly.

(9) Cut off the power. The piston rod must contract in the cylinder.

(10) When the riser is folded, the moving parts including hydraulic cylinder, pulley and upper (lower) slide block must be fixed.

(11) Check whether there are oil drops on the hydraulic system every 40 days, and conduct them regularly to prevent joint loosening caused by mechanical vibration Drips.

(12) Before the hydraulic system was transferred from the factory, the hydraulic system had changed. Check the level of hydraulic oil regularly. When it is lower than the oil label, add Add hydraulic oil until level between oil labels.

(13) When the cold press is used for one year, replace it with new hydraulic oil.

(14) Every 60 days, the lubricating oil shall be added to the reducer and screw drive parts, as well as the crusher drive bearing, to prevent dry friction Component damage.

(15) Every 60 days, the screws on the machine connections should be tightened to prevent the screws from loosening due to the vibration of the machine.

(16) According to the working environment and cleaning the PLC cable plug, the soot will blow the electronic control box regularly.

(17) Check the photoelectric switch regularly for dust, if any, it can be cleaned.

(18) Check regularly that the wires are connected in the correct way. If the wire is damaged or aged, proper measures must be taken.

(19) Check the components regularly for proper operation. If any part is burned or damaged, replace it.

As long as you pay attention to maintenance when you are using the machine, this GREENMAX Styrofoam compactor will bring great help and convenience to your foam recycling business. Welcome to contact GREENMAX team at any time.